Norma 7mm Remington Mag Brass 50 count (New)

$66.99
(No reviews yet) Write a Review
SKU:
91305
Norma #:
20270211
Norma 7mm RM Brass 50 cnt

Sold Out - Check Back Later

NORMA Brass - 7mm Remington Magnum – NEW - QTY 50

NORMA High Performance Brass Cases – Unmatched Reloadability - Unprimed

For more than 100 years, the golden rule at NORMA has been precision and quality in everything we make. NORMA brass has long been a household name for cases in a league of their own, made of the best possible raw materials with the narrowest tolerances ensuring long life and many reloads.

Introduced by Remington in 1962 as a short magnum based upon the .375 H&H case this is the most popular and widespread magnum cartridge in the world. The reasons are pretty obvious. Like all the short 7mm magnum cartridges Remington’s version is a very fine all-round big game cartridge being flat shooting and giving a very tolerable recoil. Recoil is a very decisive factor of the shooters degree of success, and the 7mm Remington Magnum delivers about as much as most of us can handle without any practice dealing with it.

None of the short 7mm magnums differs noticeably from the .275 H&H Magnum that appeared 50 years before the 7mm Remington Magnum. The fact that the last one became the most successful is due to the appearance of slow burning powders after WW II and the good and moderately priced rifles made available by Remington with its then new model 700.

KEY FEATURES:

  • Neck – Annealed to achieve proper elasticity and prevent splitting, NORMA cases are then put through a final polish process to ensure superior appearance in addition to superior performance
  • Shoulder – NORMA applies over a century of experience and proprietary tooling to ensure dimensionally perfect headspace
  • Body – Laboratory Inspection ensures proper hardness over the length of the case; softer at the neck, getting progressively harder towards the case head.
  • Tolerances – In-house tooling production allows NORMA to not only control tolerances of the finished product, but of the production tools and machines themselves. With tooling tolerances down to 7 thousands of a millimeter, NORMA is proud to have the tightest tolerances in the industry
  • Flash Hole – Three quality control inspections for the flash hole ensure a perfect centered and burr free product. Bench rest quality in every case!
  • Primer Pocket – Proper hardness of the primer pocket is critical to long case life. At NORMA, each production run is tested to a minimum of ten reloading cycles.
  • Unprimed

This is new factory brass, but it may not be packaged in retail packaging. 

Credit Card Processing